Lietuvių (Lithuanian) Deutsch (German) Polska (Polish) Русский (Russian) Français (French) Italiano (Italian) English
Chips, Siberian larch tiles, shingle

Installation of shingles

Medinių čerpių (gontų) montavimas

Vlatausa, Ltd. deals with:

Production and manufacturing of tiles made from Siberian larch that are used for wall decorations and wooden roof contructions.

Installation

Medinių čerpių (gontų) montavimasThe correct installation of shingles which ensures longevity of life. Therefore, the choice of the installer needs special attention to their qualifications. The only restrictive condition is the exploitation of shingles cover the slope. It should be 18 degrees or more. The greater the surface slope, the better, because shingles is getting longer life. Covered in three layers. Arbours, and enough to cover the facades and two. Fitted to the rafters, covered film, protection from weather-beaten during installation, thereby prolonging the life of the roof structure. Film need only to avoid the wooden surface condensation. If the loft is being fitted as a residence in an area that must be carried out and insulation works.

In order to better circulate air cover flow, it is recommended mounting lathing grate principle, rather than as a continuous underlay. Shingles cover is heavy (15-18 kg / m 2), so you do not install cumbersome design. Originally mounted longitudinal tašeliai, which are mounted on the lathing. Lathing used 50x50 or 40x40 mm tašeliai. Designed for mounting rows of shingle, laying from the bottom up, including leaving a small gap that the temperature and humidity fluctuations in the wood to expand freely. Gonta approved prikalant galvanized or copper nails. Nails with cover to hide the next layers. The installation of shingle, mounting seams must not add layers to a minimum of 2 cm. This installation has a relatively complex procedure, since the passing of each table should be selected that the seams do not overlap with the bottom layers.

Closure elements can be installed from the same shingles and use of larch or oak boards. You can also use copper or steel sheet articulated. Rain system can also be varied - a traditional provider of metal and larch gutters with decorative flush the chain or the like. 100 m2, covering installation, including roof structure, the lathing and the same coating shingles need to spend 15 to 25 days. Gonta fasadinėse pavements are laid in layers 2 minutes. This means that only half the length of the wooden tiles directly affected by environmental conditions. Different and lathing step, and some užbaigiamieji elements. As a small shingles cover the shortfall may be identified only in the fact that their installation requires manual labor, complex mechanisms for practical use. As a result, accelerate the installation work is not very appearance.

Back   |   Page Up   |   Print this page
             © 2008 UAB “Vlatausa”. All rights reserved Kauno raj. Garliava, Lietuva Tel: +370 611 53563, +370 611 37344. Fax: +370 374 40144. E-mail: info@vlatausa.com